avatar_Radish

Airfix

Started by Radish, September 01, 2007, 09:46:18 AM

Previous topic - Next topic
Print
Go Down Pages 1 ... 432 433 434 435 436 ... 489
User actions

Beermonster58

#6495
November 10, 2023, 03:26:57 AM
Quote from: Gondor on November 10, 2023, 02:18:55 AMAirfix just announced a new tool 1/72 Me 410. Markings and parts for two different sub-variants, with the marking being for two machines, one in the USA and the other in the UK

Gondor
)
Excellent choice and, what's even better, it's not yet another bloody Spitfire (that'll probably get sneaked in later.....! :-\ 
Hates rivet counters! Eats JMNs for breakfast!

NARSES2

#6496
November 10, 2023, 06:27:26 AM
Quote from: Beermonster58 on November 10, 2023, 03:26:57 AMit's not yet another bloody Spitfire (that'll probably get sneaked in later.....! :-\ 

There are marks that could do with a mainstream, rather than limited run, tooling, but horses for courses I suppose.
Do not condemn the judgement of another because it differs from your own. You may both be wrong.

NARSES2

#6497
November 10, 2023, 06:31:48 AM
Quote from: Gondor on November 10, 2023, 02:18:55 AMAirfix just announced a new tool 1/72 Me 410. Markings and parts for two different sub-variants,

Gondor

I thought someone was pulling my leg when they texted me the news  :rolleyes:  I can see me wanting 2 kits so as to cover both subtypes. Always liked the 410 and fancy one in ANR markings.
Do not condemn the judgement of another because it differs from your own. You may both be wrong.

Old Wombat

#6498
November 10, 2023, 08:04:09 AM
Why would anyone want to do a Me.410 in Australian National Railways markings? :blink:

Of course, there are a few variations to choose from:



Has a life outside of What-If & wishes it would stop interfering!

"The purpose of all War is Peace" - St. Augustine

veritas ad mortus veritas est

kerick

#6499
November 10, 2023, 08:19:12 AM
If I ever build a train layout these could run on the underside of the table.......... :wacko:

Oh wait, the guy from the flat earth society now says the earth is a donut. I'd have to run the trains up the wall now.    :o
" Somewhere, between half true, and completely crazy, is a rainbow of nice colours "
Tophe the Wise

Gondor

#6500
November 10, 2023, 08:28:55 AM
Quote from: kerick on November 10, 2023, 08:19:12 AMIf I ever build a train layout these could run on the underside of the table.......... :wacko:

Oh wait, the guy from the flat earth society now says the earth is a donut. I'd have to run the trains up the wall now.    :o

Surely they would run in rings?

Gondor

My Ability to Imagine is only exceeded by my Imagined Abilities

Gondor's Modelling Rule Number Three: Everything will fit perfectly untill you apply glue...

I know it's in a book I have around here somewhere....

NARSES2

#6501
November 10, 2023, 09:09:29 AM
Quote from: Old Wombat on November 10, 2023, 08:04:09 AMWhy would anyone want to do a Me.410 in Australian National Railways markings? :blink:


Quote from: kerick on November 10, 2023, 08:19:12 AMIf I ever build a train layout these could run on the underside of the table.......... :wacko:

Oh wait, the guy from the flat earth society now says the earth is a donut. I'd have to run the trains up the wall now.    :o

Quote from: Gondor on November 10, 2023, 08:28:55 AM
Quote from: kerick on November 10, 2023, 08:19:12 AMIf I ever build a train layout these could run on the underside of the table.......... :wacko:

Oh wait, the guy from the flat earth society now says the earth is a donut. I'd have to run the trains up the wall now.    :o

Surely they would run in rings?

Gondor


Collective  :banghead:  :banghead:  :banghead:  ;D  ;D
Do not condemn the judgement of another because it differs from your own. You may both be wrong.

jcf

#6502
November 10, 2023, 10:31:02 AM Last Edit: November 10, 2023, 10:32:33 AM by jcf
Interesting release.
It is amusing how some folk think that Airfix would be able to easily
produce an Me 210 now they have the 410 CAD and moulds. 
:rolleyes:

Yeah, easy peasy all it takes is new fuselage and wing moulds. Unless, of course, Airfix has engineered the kit with separate outer wing panels and rear fuselage.
:wacko:

The Wooksta!

#6503
November 10, 2023, 11:38:32 AM
The late 210s had the same fuselage as the 410.  Not that I need either.  Where's the Scimitar we've been asking for, repeatedly and loudly for over a decade?
"It's basically a cure -  for not being an axe-wielding homicidal maniac. The potential market's enormous!"

"Visit Scarfolk today!"
https://scarfolk.blogspot.com/

"Dance, dance, dance, dance, dance to the radio!"

The Plan:
www.whatifmodelers.com/index.php/topic

Gondor

#6504
November 10, 2023, 11:41:14 AM
Quote from: jcf on November 10, 2023, 10:31:02 AMInteresting release.
It is amusing how some folk think that Airfix would be able to easily
produce an Me 210 now they have the 410 CAD and moulds.
:rolleyes:

Yeah, easy peasy all it takes is new fuselage and wing moulds. Unless, of course, Airfix has engineered the kit with separate outer wing panels and rear fuselage.
:wacko:

Not going by the video


which shows the breakdown of the sprues.

Gondor
My Ability to Imagine is only exceeded by my Imagined Abilities

Gondor's Modelling Rule Number Three: Everything will fit perfectly untill you apply glue...

I know it's in a book I have around here somewhere....

jcf

#6505
November 10, 2023, 11:42:38 AM
Quote from: Gondor on November 10, 2023, 11:41:14 AM
Quote from: jcf on November 10, 2023, 10:31:02 AMInteresting release.
It is amusing how some folk think that Airfix would be able to easily
produce an Me 210 now they have the 410 CAD and moulds.
:rolleyes:

Yeah, easy peasy all it takes is new fuselage and wing moulds. Unless, of course, Airfix has engineered the kit with separate outer wing panels and rear fuselage.
:wacko:

Not going by the video


which shows the breakdown of the sprues.

Gondor
'Twas a joke.  ;)

Gondor

#6506
November 10, 2023, 11:45:47 AM
Quote from: jcf on November 10, 2023, 11:42:38 AM'Twas a joke.  ;)


'Twas easy to find and post  ;D

Gondor
My Ability to Imagine is only exceeded by my Imagined Abilities

Gondor's Modelling Rule Number Three: Everything will fit perfectly untill you apply glue...

I know it's in a book I have around here somewhere....

jcf

#6507
November 10, 2023, 12:02:43 PM
Quote from: Gondor on November 10, 2023, 11:45:47 AM
Quote from: jcf on November 10, 2023, 11:42:38 AM'Twas a joke.  ;)


'Twas easy to find and post  ;D

Gondor
Just imagine the weeping, wailing and rending of clothes if they had engineered it with separate bits to allow a 210 from the same basic moulds.
;D

Gondor

#6508
November 10, 2023, 01:43:29 PM
Quote from: jcf on November 10, 2023, 12:02:43 PM
Quote from: Gondor on November 10, 2023, 11:45:47 AM
Quote from: jcf on November 10, 2023, 11:42:38 AM'Twas a joke.  ;)


'Twas easy to find and post  ;D

Gondor
Just imagine the weeping, wailing and rending of clothes if they had engineered it with separate bits to allow a 210 from the same basic moulds.
;D

And in future time people look back and wonder why they never released a 210.  :rolleyes:

Gondor
My Ability to Imagine is only exceeded by my Imagined Abilities

Gondor's Modelling Rule Number Three: Everything will fit perfectly untill you apply glue...

I know it's in a book I have around here somewhere....

PR19_Kit

#6509
November 10, 2023, 02:04:27 PM
Quote from: Gondor on November 10, 2023, 02:18:55 AMAirfix just announced a new tool 1/72 Me 410. Markings and parts for two different sub-variants, with the marking being for two machines, one in the USA and the other in the UK


Even Airfix are getting into the 'Captured' thing.  :o
Kit's Rule 1 ) Any aircraft can be improved by fitting longer wings, and/or a longer fuselage
Kit's Rule 2) The backstory can always be changed to suit the model

...and I'm not a closeted 'Take That' fan, I'm a REAL fan! :)

Regards
Kit
Print
Go Up Pages 1 ... 432 433 434 435 436 ... 489
User actions