avatar_NARSES2

My Stash Just Grew Again 2023

Started by NARSES2, December 31, 2022, 05:19:39 AM

Previous topic - Next topic

Snowtrooper

No knowledge required anymore unless playing Trivial Pursuit, because we have Wikipedia:
https://en.wikipedia.org/wiki/Left-_and_right-hand_traffic
Anecdotal evidence points out that wagon-drivers whipped the horses with their dominant right hand and thus sat most often on the left side of the carriage, therefore RHT would have made passing oncoming traffic easier.

Ancient Romans drove in the middle of the road whenever possible, but if the road was wide enough for two lanes, stayed to the right-hand side.

Fast forward to Early Modern times, there was no official ruling prior to the 18th century, in many places not even before the 20th.
LHT in the UK stems from London Bridge Act of 1765, "all carriages passing over the said bridge from London shall go on the east side thereof".
Around the same time, Sweden made LHT a law while Russia made the already established local practice of RHT into a law.
Austia-Hungary was LHT until its breakup when the successor states switched to RHT which was the standard by then.
Contrary to the urban legend, Napoleon did not change anything with his conquests, even France remained unstandardized at the time.

NARSES2

Quote from: Rheged on March 13, 2023, 04:54:28 AMI think that the official terminology in Britain is trains go UP to London and DOWN away from it...................but there a people here who know more than I do about such things

Not sure if it's official, but it is the way people talk about tracks.
Do not condemn the judgement of another because it differs from your own. You may both be wrong.

Dizzyfugu

#422
A small purchase: somebody sold (only) the decal sheet from a Special Hobby AH-1G, the kit with optional Spanish Navy markings. Since I recently had th inspiration to do a Spanish Navy Skyhawk, the markings might come in handy...  ;) 
Now I've got to find a cheap new-mold Airfix A-4B.  :mellow:

DogfighterZen

Another one coming from Superhobby in Poland...

"Sticks and stones may break some bones but a 3.57's gonna blow your damn head off!!"

Lost Cosmonauts

1/72 scale Ryan Vertijet as a Mach 2 kit - a thank you from a chap who I built a model for. Teeny tiny plane with a whacking great big trolley
"You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete"

Dizzyfugu

Beware of the clear parts - I have heard horrid thing about this kit from a primary source...

PR19_Kit

I've got a Mach 2 X-13 too, and it may appear in the 50s GB.

The canopy will need some SERIOUS polishing but I'm not sure how to do that on the inside as it's so tiny.  :banghead:
Kit's Rule 1 ) Any aircraft can be improved by fitting longer wings, and/or a longer fuselage
Kit's Rule 2) The backstory can always be changed to suit the model

...and I'm not a closeted 'Take That' fan, I'm a REAL fan! :)

Regards
Kit

Lost Cosmonauts

Quote from: PR19_Kit on March 14, 2023, 02:21:36 AMI've got a Mach 2 X-13 too, and it may appear in the 50s GB.

The canopy will need some SERIOUS polishing but I'm not sure how to do that on the inside as it's so tiny.  :banghead:

I was thinking Brasso, Silvo and then whitening toothpaste in sequence on a cottonbud

Quote from: Dizzyfugu on March 14, 2023, 02:18:21 AMBeware of the clear parts - I have heard horrid thing about this kit from a primary source...

Doesn't look the best in the box but I'd heard horror stories about the X-3 as well but still got a fun build out of it. Not a stellar model but an entertaining diversion
"You never change things by fighting the existing reality. To change something, build a new model that makes the existing model obsolete"

zenrat

#428
Hobby Link Japan had a sale (including shipping - which was nice given its what usually stops me buying from them).

1/24 Cyber Formula car.  Full detail (including V12 engine and a driver figure) with a large number of body parts moulded in various coloured clear styrene.
20230314_192746 by Fred Maillardet, on Flickr

And these two are new repops combining Revell Parts Packs into the complete cars they were designed to be and were once released as.  Both hard to find in their original (60's) forms.  Both 1/25.  Mooneyes dragster is one i've been after for a while.
20230314_192816 by Fred Maillardet, on Flickr
20230314_192839 by Fred Maillardet, on Flickr
Fred

- Can't be bothered to do the proper research and get it right.

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

zenrat industries:  We're everywhere...for your convenience..

jcf

The V-8 with the Potvin type front-mounted blower setup and cylindrical fuel tank was also used in
the Orange Crate kit.

PR19_Kit

Quote from: jcf on March 14, 2023, 10:20:55 AMThe V-8 with the Potvin type front-mounted blower setup and cylindrical fuel tank was also used in
the Orange Crate kit.


Hmm, I think I've got a couple of them in the Parts Packs. Very nice they are too.
Kit's Rule 1 ) Any aircraft can be improved by fitting longer wings, and/or a longer fuselage
Kit's Rule 2) The backstory can always be changed to suit the model

...and I'm not a closeted 'Take That' fan, I'm a REAL fan! :)

Regards
Kit

KiwiZac

I'm working again! So there have been some impulse buys...
Untitled by Zac Yates, on Flickr
Untitled by Zac Yates, on Flickr

The Mustang is pretty much 1/48 so will be getting a proper paint job and decals for a local machine, and man oh man is the (very close to 1/72) F-35 fun: opening fan doors, swivelling engine nozzle and removable landing gear. I expect it will do VERY good sales at UK airshows, it's so much fun!

The Tiger will be done as a friend's recently-restored example as a wedding gift (I'm about to start a model of her fiance's just-reflown-this-week Harvard to go with it).
Zac in NZ
#avgeek, modelbuilder, photographer, writer. Callsign: "HANDBAG"
https://linktr.ee/zacyates

Wardukw

Very cool gifts Zac..he's gonna love those for sure  :thumbsup:
If it aint broke ,,fix it until it is .
Over kill is often very understated .
I know the voices in my head ain't real but they do come up with some great ideas.
Theres few of lifes problems that can't be solved with the proper application of a high explosive projectile .

zenrat

I received a second Zvezda 1/144 Tu-134 today.
I haven't built the first one yet but it looks so good in the box and I have plenty of ideas.
Fred

- Can't be bothered to do the proper research and get it right.

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

zenrat industries:  We're everywhere...for your convenience..

Old Wombat

These arrived today & I've had a quick look at them.

Quote from: Old Wombat on March 09, 2023, 01:10:30 AM1 x Takom Models 1/35 Northrop Grumman MQ-8B Fire Scout 1+1 (TAK2165) - 2 kits in one, what's not to like? 8)
1 x Revell Models 1/35 MAN 7T MILGL 6x6 (RV 03291) - Unarmoured version :D
1 x HobbyBoss Models 1/35 MAN LKW 7t mil gl (HB 85522) - Armoured version ;)

The Fire Scout boxing is, quite literally, two full kits, both of which can be built as either an early or late (radar) nosed variant. (So, you can have one of each type or two of one type). Detail looks excellent, & very crisp & clean moulding.



The Revell MAN 7T comes in a side-opening box (WHY?! :banghead: ) with a lot of space around the sprues. Moulded in dark green it comes with a moulded soft cover for the cargo deck & vinyl tyres (will need to find some resin to replace those). I could see a fair amount of flash but not enough to make it look difficult to deal with. Detail is good.



The HobbyBoss MAN 7T comes with a lot more parts moulded in desert tan jammed into the top-opening box (Yay! :thumbsup: ) & several small sheets of PE. From the looks of the parts & the instructions you should be able to build an unarmoured version of the 7T without too much trouble, as the armoured plates are add-ons to the basic truck. Mouldings look quite crisp & well detailed with no visible flash but also has vinyl tyres (more resin! :rolleyes: ).



All up I'm happy with all of them but the Revell MAN 7T is beginning to show its 20+ years, while the HobbyBoss MAN 7T is still youthful at 5 years (I note HobbyBoss is expected to release a MAN 10T this year based on this kit) & the Takom kit is a Takom kit (ie: good) & a very new release.
Has a life outside of What-If & wishes it would stop interfering!

"The purpose of all War is Peace" - St. Augustine

veritas ad mortus veritas est