avatar_strobez

Tintin 1/72 - Udet U-12 Flamingo... from scratch. FINISHED!

Started by strobez, September 18, 2018, 08:51:58 AM

Previous topic - Next topic

zenrat

Quote from: strobez on February 25, 2019, 03:21:40 PM
Quote from: NARSES2 on February 25, 2019, 07:46:11 AM

That's because it's being flown by Snowy  ;D

I am going to replace that as my new standard answer... ;)

And it's one which makes perfect sense...
Fred

- Can't be bothered to do the proper research and get it right.

Another ill conceived, lazily thought out, crudely executed and badly painted piece of half arsed what-if modelling muppetry from zenrat industries.

zenrat industries:  We're everywhere...for your convenience..

Old Wombat

Cool! :thumbsup:

I know it's probably a bit late, but you can probably use it for other builds; Certain gentlemen on this site have claimed (see the Tips & Techniques boards, I think) that a pink primer works best under yellow & minimises the number of top coats required.

Haven't tried it myself, I usually go Tamiya grey primer, followed by Tamiya white primer, followed by yellow top coat (usually Tamiya ;)).
Has a life outside of What-If & wishes it would stop interfering!

"The purpose of all War is Peace" - St. Augustine

veritas ad mortus veritas est

NARSES2

Quote from: Old Wombat on February 26, 2019, 04:23:28 AM
Cool! :thumbsup:

I know it's probably a bit late, but you can probably use it for other builds; Certain gentlemen on this site have claimed (see the Tips & Techniques boards, I think) that a pink primer works best under yellow & minimises the number of top coats required.


It#s worked for me, but it needs to be pale pink, much more white than red when you mix it.
Do not condemn the judgement of another because it differs from your own. You may both be wrong.

strobez

Quote from: Old Wombat on February 26, 2019, 04:23:28 AM
Cool! :thumbsup:

I know it's probably a bit late, but you can probably use it for other builds; Certain gentlemen on this site have claimed (see the Tips & Techniques boards, I think) that a pink primer works best under yellow & minimises the number of top coats required.

Haven't tried it myself, I usually go Tamiya grey primer, followed by Tamiya white primer, followed by yellow top coat (usually Tamiya ;)).

That is an extremely helpful suggestion.  There are quite a few all-yellow builds in the Tintin project future (Tiger Moth, Ar196, SA.81, Model T, etc.) that I have started to become gunshy with.  Thanks for pointing that out!
Thanks!

Greg

Scotaidh

Dunno if this will be helpful or just annoying, but ...

I very seldom paint anything yellow other than prop tips.  And, since I mostly build "flying" models, very few of those. 

That said, I'm now building a companion to Nonobar's Royal Scots Armed Forces F-16AT - yellow spine and all, so yellow is needed.  As a primer for said yellow, I laid down a coat of Humbrol's 'Linen' - it was either that or "oak" (normally I'd have used "Cream", but I'm out).  It's doing well for me.
Thistle dew, Pig - thistle dew!

Where am I going?  And why am I in a handbasket?

It's dark in the dark when it's dark. Ancient Ogre Proverb

"All right, boyz - the plan iz 'Win.'  And if ya lose, it's yer own fault 'coz ya didn't follow the plan."

NARSES2

Quote from: Scotaidh on March 01, 2019, 01:49:11 AM

As a primer for said yellow, I laid down a coat of Humbrol's 'Linen' - it was either that or "oak" (normally I'd have used "Cream", but I'm out).  It's doing well for me.

Interesting. I have Humbrol Linen and Oak in stock from the old military figures/vehicles range. I shall give it a try.
Do not condemn the judgement of another because it differs from your own. You may both be wrong.