avatar_jcf

Kurtis-Kraft Roadster

Started by jcf, August 18, 2023, 11:33:53 AM

Previous topic - Next topic

Wardukw

It's strange when ya think about it..something as simple as a turbine coming a croppa during a race..well it was the early days for this technology...id bet it was the drive line or something along those lines...still extremely cool none the less 😎
If it aint broke ,,fix it until it is .
Over kill is often very understated .
I know the voices in my head ain't real but they do come up with some great ideas.
Theres few of lifes problems that can't be solved with the proper application of a high explosive projectile .

PR19_Kit

It was a auxiliary bearing on the Paxton, and something equally inane on Joe Leonard's 56. Neither were part of the engines.
Kit's Rule 1 ) Any aircraft can be improved by fitting longer wings, and/or a longer fuselage
Kit's Rule 2) The backstory can always be changed to suit the model

...and I'm not a closeted 'Take That' fan, I'm a REAL fan! :)

Regards
Kit

Wardukw

Typical ain't it? ...so much tech for the time and it's the mundane parts which crap out.
If it aint broke ,,fix it until it is .
Over kill is often very understated .
I know the voices in my head ain't real but they do come up with some great ideas.
Theres few of lifes problems that can't be solved with the proper application of a high explosive projectile .

jcf

Quote from: Wardukw on August 19, 2023, 08:52:17 PMGas turbine power
I do remember a real turbine indy car from way back.
There were several. The first was a Kurtis-Kraft Indy roadster that had a Boeing 502 gas turbine installed. It was the SAC
"Fire Boid" which was built in the hobbyshop of SAC's Offutt Air Base. Firestone supplied the car and Boeing supplied the
engine. General LeMay was quite taken with the car. It survives today in the Indianapolis Motor Speedway Museum.
You cannot view this attachment.

The first serious attempt at an open wheel racer was the mid-engine 1962 John Zink Trackburner, again a Boeing 502
supplied by the company along with engineering support during construction, testing and the attempt to qualify for the
1962 Indy 500. The car survives and is in the Zink Ranch Museum in Sand Springs, Oklahoma. 
You cannot view this attachment.
That's a young Dan Gurney in the driver's seat.

Len Williams of the Boeing Gas Turbine Division was the primary Boeing engineer involved in support of the Zink
program. In 1962 Len bought a surplus 502, the 502-8B that had powered the Cessna XL-19B - the first turboprop
light aircraft and used when the aircraft set an altitude record of 37,306ft. Len installed it in his 1932 Ford hi-boy
hot rod and drove it for the next 27 years, including commuting to work at the Boeing Plant 1 down by Boeing Field
in Seattle. The car survives and is in the LeMay - America's Car Museum in Tacoma, Washington.
You cannot view this attachment.
The XL-19B.
You cannot view this attachment.



NARSES2

Do not condemn the judgement of another because it differs from your own. You may both be wrong.