avatar_Hobbes

Dragon (DML)

Started by Hobbes, November 02, 2006, 04:52:45 AM

Previous topic - Next topic

Thorvic

#300
Just sort by Subject and you find Dragon, so i merged this into the main topic.

Following on from the Saladin, they have the British Conqueror MBT due out in 1/35th, so a nice BAOR heavyweight to play with, could be fun updating for Whiff use.



Also recently released in the Black Label line in 1/72nd is the M65 Atomic Cannon !!

http://dragon-models.com/d-m-item.asp?pid=DRA7484

Project Cancelled SIG Secretary, specialising in post war British RN warships, RN and RAF aircraft projects. Also USN and Russian warships

Thorvic

Project Cancelled SIG Secretary, specialising in post war British RN warships, RN and RAF aircraft projects. Also USN and Russian warships

Gondor

Quote from: PR19_Kit on December 30, 2014, 02:00:05 AM
Roll on a Stalwart. I did some work on the early ones and I'd love to model one, but can't afford the sky high prices of the current low production ones.

Accurate Armour do the Stalwart in 1/35 http://www.accurate-armour.com/ShowProduct.cfm?manufacturer=0&category=14&subcategory=234&product=2126

Gondor
My Ability to Imagine is only exceeded by my Imagined Abilities

Gondor's Modelling Rule Number Three: Everything will fit perfectly untill you apply glue...

I know it's in a book I have around here somewhere....

PR19_Kit

Quote from: Gondor on December 30, 2014, 05:18:29 AM
Quote from: PR19_Kit on December 30, 2014, 02:00:05 AM
Roll on a Stalwart. I did some work on the early ones and I'd love to model one, but can't afford the sky high prices of the current low production ones.

Accurate Armour do the Stalwart in 1/35 http://www.accurate-armour.com/ShowProduct.cfm?manufacturer=0&category=14&subcategory=234&product=2126

Gondor

Yes I know, that's the one that triggered my comment about 'sky high prices'...........
Kit's Rule 1 ) Any aircraft can be improved by fitting longer wings, and/or a longer fuselage
Kit's Rule 2) The backstory can always be changed to suit the model

...and I'm not a closeted 'Take That' fan, I'm a REAL fan! :)

Regards
Kit

Gondor

Quote from: PR19_Kit on December 30, 2014, 07:16:17 AM
Quote from: Gondor on December 30, 2014, 05:18:29 AM
Quote from: PR19_Kit on December 30, 2014, 02:00:05 AM
Roll on a Stalwart. I did some work on the early ones and I'd love to model one, but can't afford the sky high prices of the current low production ones.

Accurate Armour do the Stalwart in 1/35 http://www.accurate-armour.com/ShowProduct.cfm?manufacturer=0&category=14&subcategory=234&product=2126

Gondor

Yes I know, that's the one that triggered my comment about 'sky high prices'...........

Well it is resin with maybe some white metal in there as well which explains why its so expensive.

Gondor
My Ability to Imagine is only exceeded by my Imagined Abilities

Gondor's Modelling Rule Number Three: Everything will fit perfectly untill you apply glue...

I know it's in a book I have around here somewhere....

Captain Canada

Some really neat stuff ! But yes, that 72nd scale cannon is hugely expensive ! I wouldn't mind a Conqueror tho. Love big tanks.

:cheers:
CANADA KICKS arse !!!!

Long Live the Commonwealth !!!
Vive les Canadiens !
Where's my beer ?

Steel Penguin

conqueror amd saladin for me  :thumbsup:,   wonder if I could put the conqueror in berlin block for extra confusion 
the things you learn, give your mind the wings to fly, and the chains to hold yourself steady
take off and nuke the site form orbit, nope, time for the real thing, CAM and gridfire, call special circumstances. 
wow, its like freefalling into the Geofront
Not a member of the Hufflepuff conspiracy!

JayBee

#307
Quote from: Steel Penguin on December 31, 2014, 08:46:25 AM
I could put the conqueror in berlin block for extra confusion  

YES, YES, YES !!!!!!!!!!!

I just wish it was 1/72-76 scale.

I used to work with a guy who had been a tactical PR pilot with the RAF (never did ask what type he flew) he said that you did not have to actually recognise the Conqueror just look for any BL**DY big tank.
Alle kunst ist umsunst wenn ein engel auf das zundloch brunzt!!

Sic biscuitus disintegratum!

Cats are not real. 
They are just physical manifestations of collisions between enigma & conundrum particles.

Any aircraft can be improved by giving it a SHARKMOUTH!

NARSES2

Quote from: Steel Penguin on December 31, 2014, 08:46:25 AM
conqueror amd saladin for me  :thumbsup:,   wonder if I could put the conqueror in berlin block for extra confusion 

I knew you'd think of that  ;D
Do not condemn the judgement of another because it differs from your own. You may both be wrong.

Thorvic

Quote from: JayBee on December 31, 2014, 09:01:48 AM
Quote from: Steel Penguin on December 31, 2014, 08:46:25 AM
I could put the conqueror in berlin block for extra confusion  

YES, YES, YES !!!!!!!!!!!

I just wish it was 1/72-76 scale.

I used to work with a guy who had been a tactical PR pilot with the RAF (never did ask what type he flew) he said that you did not have to actually recognise the Conqueror just look for any BL**DY big tank.

Jim you can get them in resin in either 72nd or 76th from Cromwell Models.

Hopefully Dragon will scale theirs down to 72nd at some stage
Project Cancelled SIG Secretary, specialising in post war British RN warships, RN and RAF aircraft projects. Also USN and Russian warships

Steel Penguin

 :blink:  im becoming predictable !!  eeep  ;D
couldn't see anything on the dragon site regarding it ( I admit I didn't look that hard ) but its nice to see some of the British stuff, and the saladins will be nice for the not quite tank look they have.
the things you learn, give your mind the wings to fly, and the chains to hold yourself steady
take off and nuke the site form orbit, nope, time for the real thing, CAM and gridfire, call special circumstances. 
wow, its like freefalling into the Geofront
Not a member of the Hufflepuff conspiracy!

Weaver

#311
Saladin is out: http://www.dragonmodelsusa.com/dmlusa/prodd.asp?pid=DRA3554

No word yet on how accurate or inaccurate it is....(have to say, nothing's leapt out at me yet)

Wonder how long it will take the aftermarket to get reverse-flow cooling mods and Omani-theatre stowage baskets out?
"Things need not have happened to be true. Tales and dreams are the shadow-truths that will endure when mere facts are dust and ashes, and forgot."
 - Sandman: A Midsummer Night's Dream, by Neil Gaiman

"I dunno, I'm making this up as I go."
 - Indiana Jones

ChernayaAkula

In-box review of the Saladin by Cookie Sewell on HyperScale: LINK!

Verdict:
Quote from: Cookie SewellOverall this is a nicely done kit, but a few more details would have been appreciated for the price.

Can't help but wish this one would've been done by Hobby Boss or Trumpeter. Same level of detail at a better price.   :wacko:
Cheers,
Moritz


Must, then, my projects bend to the iron yoke of a mechanical system? Is my soaring spirit to be chained down to the snail's pace of matter?

Captain Canada

Does sound a little disappointing, but would still make for a really nice looking model !

:cheers:
CANADA KICKS arse !!!!

Long Live the Commonwealth !!!
Vive les Canadiens !
Where's my beer ?

rickshaw

Actually, sounds encouraging.  'bout time there was a new Saladin available and hopefully we'll see Saracen/Stalwart/Salamander in the future.  No major problems just a few minor niggles IMO.  Some crew figures to fill the hatches would have been nice.    :thumbsup:
How to reduce carbon emissions - Tip #1 - Walk to the Bar for drinks.