avatar_McColm

Converting the Airfix BAe Nimrod into a passenger aircraft

Started by McColm, June 02, 2017, 03:55:30 PM

Previous topic - Next topic

McColm

There's been a lot of talk in converting the Airfix 1/72 HS/BAe  Nimrod Mk1/2 back into a medium range passenger transport aircraft.
You can still pick up a kit for less than £50 on that popular auction site or if you prefer the vacform model.
With careful cutting the lower fuselage that houses the weapons bay can be detached.
The vertical tail fin will need attention or a new fin made to get the correct shape of the de Haviland Comet 4B/C.
Or you could call it the 4D as I don't think any commercial airliner ever flew with the Rolls Royce Spey engines. That is where the problem lies. I haven't found any conversion aftermarket kits that provide the Avon engines.
The wing fuel tanks can be reworked using spare parts of a drop fuel tank to replace the searchlight.
Detailing the interior, you could use the Revell Rotodyne seating or the Mach2 Caravelle. This has the reverse seating layout. Extra windows along the fuselage with clear windows so you can see the interior.
A combo with a cargo door in the open position might be better.
This could also be an alternative to the airliner as the Comet E.Mk2. With the interior from the Airfix Avro Shackleton.
The white metal landing gear would be a finishing touch.
There are other aftermarket kits that can be used if you want to build the many experimental aircraft used by the A&AEE at Boscombe Down.

PR19_Kit

All Comets either had DH Ghosts or RR Avons, but all Nimrods had Speys so there wouldn't be much chance that someone would do such a retro conversion, the manufacturers are far to conservative like that, apart from Colin Freightdog of course.  :thumbsup:

Why not stay with the Speys, DH would probably have gone that route anyway eventually, or used Conways to get the advantages of a by-pass engine. And if you kept the lower pannier that would make the MOTHER of all baggage areas too. That would make it just a repaint job after you'd sawn off the MAD boom and the ECM fin tip.

I can just see a BOAC Nimrod in my mind's eye too.  ;) ;D
Kit's Rule 1 ) Any aircraft can be improved by fitting longer wings, and/or a longer fuselage
Kit's Rule 2) The backstory can always be changed to suit the model

...and I'm not a closeted 'Take That' fan, I'm a REAL fan! :)

Regards
Kit

JayBee

I have for some time entertained the thought of stretching one and doing it in Virgin Atlantic colours.  :wacko:
Alle kunst ist umsunst wenn ein engel auf das zundloch brunzt!!

Sic biscuitus disintegratum!

Cats are not real. 
They are just physical manifestations of collisions between enigma & conundrum particles.

Any aircraft can be improved by giving it a SHARKMOUTH!

The Wooksta!

"It's basically a cure -  for not being an axe-wielding homicidal maniac. The potential market's enormous!"

"Visit Scarfolk today!"
https://scarfolk.blogspot.com/

"Dance, dance, dance, dance, dance to the radio!"

The Plan:
www.whatifmodelers.com/index.php/topic

Gondor

This is almost sensible. Your going to need to either make loads more windows or to fill in the existing ones and use decals for a passenger version. Maybe calling it a "Comet 5" due to the engine change?

Gondor
My Ability to Imagine is only exceeded by my Imagined Abilities

Gondor's Modelling Rule Number Three: Everything will fit perfectly untill you apply glue...

I know it's in a book I have around here somewhere....

McColm

And here's one I built earlier!
The Sky Guardian, which is a stretched Airfix HS/BAe Nimrod kit with a flying boom for refueling and hose-drogue basket attached
The tail has been replaced with the Airfix Valiant and a pair of cheek EC-135 W/V pods.
The searchlight has been replaced with part of a drop tank from a Tornado.
The cheek pods could be removed and extra windows painted along the fuselage with a cargo door.
Sort of troop transport/refueling aircraft. With the right set of decals and paint scheme this would look convincing.

McColm

I've been on line to find RAF Transport Command decals in 1/72 scale.
I came across the decals for the Dakota
C-47 and then discovered decals for the VC10 which includes the windows. Most are for the RAF 40th Anniversary for the VC10.

kitnut617

Quote from: McColm on June 03, 2017, 12:01:27 PM
I've been on line to find RAF Transport Command decals in 1/72 scale.
I came across the decals for the Dakota
C-47 and then discovered decals for the VC10 which includes the windows. Most are for the RAF 40th Anniversary for the VC10.

Why don't you just go on Hannants website, look in the AIM-Transport Wings section and get the RAF Comet decals

https://www.hannants.co.uk/product/TWL7208204
If I'm not building models, I'm out riding my dirtbike

Mossie

I've toyed with converting it's rival  to a civvy bird, the Breguet Atlantic. I've had a few thoughts on how to do it, but not come up with a firm idea.

Model Art and Xtradecal do sets with Transport Command titles, among others along with codes.  I've got all these sets, very useful, especially the Royal Marines codes on the Modelart set which I've never seen anywhere else:

Modelart in black:  https://www.hannants.co.uk/product/MAGEN004

Xtradecal in black:  https://www.hannants.co.uk/product/X72157
Xtradecal in white:  https://www.hannants.co.uk/product/X72158
I don't think it's nice, you laughin'. You see, my mule don't like people laughin'. He gets the crazy idea you're laughin' at him. Now if you apologize, like I know you're going to, I might convince him that you really didn't mean it.

McColm

With the release of the 1/72 Mach2 de Haviland Comet 4C is it possible to kitbash or is it closer in scale to the Mach2 sud Caravelle?
The possibility of those two Mach2 kits having the wings and tail swapped over opens up further Whiffs.